 |
|
|
|
JNS-209A(°µ×°) |
Install the sketch map |
|
|
| Features and Functions: |
¡ò
WATER-SAVING:Each average water consumption is 6L(based on
water pressure of 0.2-0.8Mpa)
¡ò HYGIENIC:The
whole rinsing process is done by the flusher itself, clean and efficient.
The hands-free feature can keep you free from bacteria infections,
especially in busy restrooms.
¡ò LOW POWER
CONSUMPTION:Use 220V alternating current, trans formation
9V working stability.
¡ò EASY TO MAINTAIN:There
are water regulating valve and strainer inside, regulation for 2nd
cleaning can be easily done even by lay people.
¡ò CHARACTER
OF INSTALLATION:With rectangular appearance, the concedal
designed flusher is suitable for standard walls installation.
¡ò FLUSHING-TIME
ADJUSTABLE:In order to rinse completely and cleanly, when
it is used in low water pressure(0.1-0.25Mpa),its flushing time can
be adjusted to & seconds under guidance of its instructions; the
interval between body-leaving-detection zone and flushing-beginning
can be adjusted according to your needs.
¡ò TRAPSEAL
PROTECTION: It will flush automatically every 24
hours if not used to avoid the odor returning once trap dries. |
| Specifications and
main technical paramters: |
| Medel |
JNS-209A(½»Á÷ʽ/AC) |
|
Factory 50cm
(Based on standard inductive board)
|
Dia.of inlet
pipe |
G1" |
Dia.of outlet
pipe |
G1)" |
Ambient temperature |
0.1-45¡æ |
Water presure |
0.1MPa-0.8MPa |
Degree of protection
by enclosure |
Lp56 |
Power and
voltage |
AC.220V-50/60HZ |
Power consumption |
<2W |
Dimensions |
180¡Á130 |
|
